Introducing Potter's IntelliGen™ Nitrogen Generators
Potter’s IntelliGen™ Nitrogen Generator Systems provide a low cost, reliable, and efficient method of producing up to 99% pure nitrogen on-site at the point of usage.
The Model WFSR-F is a pressure operated switch with an adjustable, instantly recycling pneumatic retard to prevent false alarms due to water pressure variation. The WFSR-F is connected into the alarm port of a wet sprinkler system alarm check valve. Unique Features The first and only waterflow pressure switch with retard 0-90 second field replaceable retard Two conduit entrances Codes & Approvals UL, cUL, FM, CSFM, CE, VdS Complies with the requirements of NFPA…Continue Reading
In a major change that impacts installers, the 2016 NFPA 13 adds a new requirement that a single air vent be installed for each wet sprinkler system to help reduce potential corrosion activity due to trapped air. See below: 7.1.5 Air Venting A single air vent with a connection conforming to 8.16.6 shall be provided on each wet pipe system utilizing metallic pipe. 8.16.6 Air Venting The vent required by 7.1.5 shall be located near a high point in the system to allow air to be removed from…Continue Reading
Potter announces the acquisition of three mainstay product lines in the fire alarm industry: Harrington Fire Alarm, Evax Systems, and CPG Signals. The acquisition of these three product lines will not only strengthen Potter’s position as a leader in life safety products, but will also broaden the range of products and services available to customers in order to meet all their fire protection needs. By incorporating the technologies of these products, Potter will expand its…Continue Reading
Potter Electric representatives on team "Potter Peloton" at the Pedal the Cause bike race for charity. Potter Electric Signal Company, LLC was a proud participant in the sixth annual Pedal the Cause charity bike race in St. Louis, Missouri. So far in 2015, Pedal the Cause has raised over $2.3 Million to benefit both Siteman Cancer Center and Children’s Hospital St. Louis. 100% of every dollar raised will be donated to these organizations. Potter Peloton Team Members…Continue Reading
The Model RBVS is designed to monitor the fully open position of a ball valve installed in a sprinkler system. The unit will fit on most ball valves installed on back-flow-preventers and alarm trim lines of dry, alarm, and deluge sprinkler valves. The switch operates if the ball valve handle is moved from the open position. However, the switch does not track the position of the handle or ball. When the ball valve handle is in the open position, a spring-loaded switch button will contact the…Continue Reading